On the end wall of that space this vintage breakfront secretary with bubble glass now sits. It fits so well, it looks like it was made for the space. At first glance, one might think this is a true antique piece of furniture, antique being at least years old. It has the handsome details of an Early American piece in its rich mahogany wood… Sheraton? Beautiful egg and dart detail across the top. The drop front drawer slides out to reveal the secretary desktop. Flanking each side of the secretary desktop are two faux drawers that are large cabinets. You can see from the inside of the doors, how the glass is curved out for each wood trim on the front.
Furniture Detective: Screws give valuable clues when in search of antique furniture origins
After all, Helen, an art adviser, is the latest in a bafflingly long list of bright, successful women believed to have been seduced by the bumbling, unlikely Lothario, and he appears to be in no greater hurry to leave his long-suffering wife Marina for her than for any of the rest. The episode ended her relationship with her long-term lover and left her alone to bring up a child whose father will not even publicly acknowledge her.
Of course, breaking her silence would prompt a scandal that would eclipse anything even Boris has experienced before, putting paid to any hopes he harbours of one day becoming Prime Minister.
One of the most overlooked and least understood clues in establishing the date and authenticity of older and antique furniture is the story that screws can tell about the history of a piece.
These tips will help you understand a little better what the pros look at when they judge a piece of antique furniture. Following are some elements to look for that will help you better judge the age of a piece of wood. Saw Marks or Kerf Marks Pit Saw The marks left by this saw were irregular, uneven cuts made from strokes of the large saw used by two men.
One man stood in a pit and the other man stood on top of the log above the pit sawing the log between them. The men changing hand and body positions caused the irregular cuts. It was large, cumbersome and often far away from the house lot, therefore it was easier to use the pit saw rather than haul the logs to the mill and then haul the sawn lumber home.
Circular Saw This saw, invented by a Shaker woman named Sister Tabitha Babbit in , but was not in general use until when steam engines came along. The marks were circular, so it is a pretty sure bet that if you see circular saw marks, you know the board was sawn some time after
Antique Drawer Pulls and Handles
An Antique Chest of Drawers or any Georgian furniture are well designed pieces and are built to a very high standard. They are made using good quality woods such as mahogany and oak and the screws were made by hand. The style of English Georgian furniture was mostly plain and simple and had a similarity to the architectural lines of buildings.
Furniture was hand crafted, and good quality solid woods were abundant, and along with good metalware fittings, quality was of the utmost imortance. As the British Empire expanded more and more, new and different woods were discovered and became available.
Originally called Streamline Maple, these early pieces were labeled with one of several styles of paper tag. The tags were generally affixed to the back or underside in the case of tables of the furniture. This has left a lot of the most classic, coveted vintage Heywood-Wakefield pieces without a label for easy identification. However, there are clues that can help determine if what you have is a genuine Heywood-Wakefield item.
The Wood and Finish This furniture was first known as Streamline Maple because that was the original wood used, along with birch, which is very similar. In , Streamline Maple became Streamline Modern; maple was still used for some furniture, but by , Heywood-Wakefield switched exclusively to birch. If you can identify types of wood by its color and grain pattern, this is another clue.
The Stamps Once the eagle logo was introduced in , it was typically stamped into the top left-hand drawer of case pieces, on the underside of tables, or on the bottom stretcher of bed headboards. This makes most later Heywood-Wakefield easy to identify. Also, the majority of Heywood-Wakefield pieces had an inspection or shipping date stamped on the back in small numbers, usually no more than an inch long.
Antique Furniture Hardware
However, learning a few basic tips and tricks used by experienced antique collectors and dealers will give even a novice collector the general knowledge needed to identify a piece of antique furniture. Tips for Identifying Antique Furniture There are several things to look for when examining a piece of furniture that help to identify it as an antique. Check for a signature or label from the furniture maker. Make sure the piece is in proportion.
Furniture screws: primitive to gimlet O ne of the most overlooked and least understood clues in establishing the date and authenticity of older and antique furniture is the story that screws can tell about the history of a piece.
How to Date Furniture by Casters By Ann Johnson ; Updated April 12, Furniture casters are viewed as a convenience that helps us move furniture so we can vacuum or rearrange the room. Yet, casters sometimes had more to do with lighting than housekeeping or design. Casters were fit on the legs of desks to allow the desk to be moved around the room to capture the changing sunlight throughout the day. Another use for casters is to estimate the date of the furniture.
Look to see if the caster is a leathern bowl or roller. This is one of the earliest forms of casters, indicative of furniture made during the Queen Anne period in the early s. Inspect the casters to see if they are made from wood and held in place by iron. Wood casters held by iron plates might indicate the Georgian Period from to Determine if the casters are made from cast iron instead of wood.
This would indicate a later Georgian period, from to Check to see if the caster is brass with a laminated leather caster. This style could indicate the Georgian period from to Verify if the caster is solid brass. This can indicate the furniture style of the Georgian period from to
IKEA’s flatpacked tax bill shows it’s time to put screws on beancounters
See Article History Alternative Title: Furniture ranges widely from the simple pine chest or stick-back country chair to the most elaborate marquetry work cabinet or gilded console table. The functional and decorative aspects of furniture have been emphasized more or less throughout history according to economics and fashion.
Dating Furniture Tips & Guides Article. PHONE: () If you find Phillips head screws throughout, you don’t have an antique. On the other hand, hand forged nails and screws with off-center slots and uneven threads can be taken from older furniture and used in a piece made yesterday. Check for the thickness of veneers.
You’ll also be signed up to receive e-newsletters from Antique Trader and partners. Fred Taylor October 18, One of the most overlooked and least understood clues in establishing the date and authenticity of older and antique furniture is the story that screws can tell about the history of a piece. Screws are relative newcomers to the production of furniture, primarily because they are so hard to make by hand.
But as the complexity and sophistication of furniture increased in the late 17th century and the use of brass hardware, locks and concealed hinges became more popular, there was an obvious need for a fastener that could hold two surfaces together without having to penetrate the back surface of the second piece. The screw on the left was handmade in the late 18th century. Note the flat spot on the shaft, the irregular threads, blunt tip and the off center slot.
The screw in the center is machine made around It has sharp, even threads, a cylindrical shape, blunt end and the slot is still off center. The screw on the right is a modern gimlet screw, post , with tapered shaft, even threads, pointed tip and centered slot.
Motor Vehicles, Furniture, Tools, Electrical, Collectables
A nail may not be a noticeable style feature, but looking at them carefully can help you authenticate the age of a primitive or antique furniture piece before you buy. Like restorers of historical buildings, you can identify the period by the technology used to create the nails and unlock the past of furniture. Hand-wrought Until the 18th century, nail production methods had not changed for hundreds of years.
Iron ore and carbon heated together and then cooled created wrought iron, from which a nail length piece was cut and hammered on four sides to create a point. Hand-wrought nails have tapered but irregular and crooked square shafts. These nails have heads known as rose heads, a faceted and shallow pyramid-shaped design created from four blows of an ironsmith’s hammer.
Shop our selection of interior screws for all your woodworking needs. Find pocket hole screws, finished screws, flathead screws & more.
Drawer construction has changed several times in the last years. Antique Furniture , vintage furniture ; determining the age of the antique and vintage. How can you tell the age of a piece of furniture? This is a big topic to tackle. Construction techniques can assist you in dating furniture. A joint is where two. Modern “brad” and “penny” nails were introduced around Screws were occasionally used in furniture pre- dating the beginning of the machine era Circa.
Determining the date of old furniture pieces can be tricky.
How to Identify the Age of Furniture by the Nails
Missing just one of these little hinges? They are in very good condition and the perfect finishing touch to that table or chest you are restoring or building. The double flap on one side held on with a screw keeps them from deviating from a precise 90 degree You will receive everything in the picture for the above price. Made of thick cast brass it has a medium patina. The numbers are embossed on the back.
This article describes and illustrates antique & modern hardware: door knobs, latches, hinges, window latches, hardware, nails & screws can help determine a building’s age by noting how those parts were fabricated: by hand, by machine, by later generations of machine.
Furniture Handle Styles More than just a functional device, drawer and cupboard handles or knobs can provide both a decorative fillip to a piece of furniture and useful clues in dating it. The earliest forms of furniture didn’t really need handles and it wasn’t until drawers came into general use in the 17th century that handles became a decorative element in a piece of furniture.
The metal mounts on imported Chinese furniture were an inspiration, and ca ly handles were usually made of cast brass. Much about the date of a handle can be learned from the material itself, as well as the way it’s shaped. Brass made before often had an unattractive, pitted look. From that date, lead was added to the mix of copper and calamine to produce a metal with a softer feel. It’s less shiny, and more yellow than brass made after around In that year, James Emerson patented an alloy of copper and pure zinc, which, because of its closer resemblance to gold and the lack of pitting, soon became the standard form of brass.
The first metal handles, though, used in the early and mid th century, tended to be made of iron and were shaped like inverted hearts. These were still being used on country furniture in the 18th century, but on better pieces were supplanted by drops, usually teardrop-shaped lumps of solid brass that were hinged to a backplate at their narrow end.